| Home | Training | Publications | Conferences | Services | Book Store | Resources |
|
|
|
||||||
|
||||||||
|
The OILMISER FILLORDRAIN was originally introduced in the mid 1970's to improve maintenance procedures on industrial hydraulic systems. This new and innovative breather assembly replaces the conventional filler/breathers used on hydraulic reservoirs and industrial storage tanks. A companion FILLorDRAIN screws directly into the 2" pipe bung on a standard oil drum. Without ever removing the highly efficient air filter, both filling and draining are done through the same inlet/outlet port, while air enters or exits through the replaceable air filter. The results are a fluid transfer procedure that is contamination free, the elimination of aeration and turbulence, and a cost effective maintenance program that is easy to implement. In our newest version of the OILMISER™ FILLORDRAIN™ we added an integral sampling port. Now the lubrication specialist, can draw a reliable oil sample without opening the reservoir, and without removing the air filter element. With consistent and contamination free oil samples, comes a new level new confidence in "condition-based" oil changes. The external 1/4" NPT pipe port connects to a 15 inch sampling tube extending directly into the reservoir. Special "pipe clips" insure the position of the sampling tube in the reservoir. Like the original FILLorDRAIN, it's a simple and cost effective retrofit on most existing reservoirs. JLM Systems, Ltd.
<< BACK TO BUYERS GUIDE | + ADD YOUR COMPANY *Information provided by the listed company and may not represent the opinions of Noria Corporation. |
|
|
